How Much Do You Know About Car Beauty-Complete Guide To Automotive Coating（Ⅴ）

Complete Guide To Automotive Coating（Ⅴ）

5. Coating method

There are 5 processes for coating and beauty, and the operation time takes about 2 to 3.5 hours.

Step one: Neutral cleaning.

Even though it's just cleaning, it's very particular. Use neutral cleaning agents, because alkaline cleaning agents will corrode the car paint. If they remain in the gaps of the car body, they will be even more corrosive.

Step 2: Clay sanding.

Since long-term accumulation of dust, colloid, flying paint and other dirt is difficult to remove by cleaning, the surface of the cleaned car paint is still rough, which requires a "removal agent" extracted from fine volcanic ash. "Dirty clay" for a comprehensive sanding process.

Step 3: Paint repair. 

Carry out deep cleaning first. Just like the pores on human skin need to be cleaned, the pores of car paint also need to be cleaned. Use an electrostatic polishing wheel with a brightening agent to generate static electricity while rotating to suck out the dirt in the pores. At the same time, the brightening agent penetrates into the interior of the car paint and undergoes a reduction reaction, which can achieve the effect of making the car paint as bright as new. Another function of polishing is to smooth out small soft scratches on the surface of the car paint.

Step 4: Magic restoration. 

This is a key step in sealing glaze beauty. Under the squeeze of the vibration polishing machine, the glaze-like protective agent is deeply pressed into the pores of the car paint, forming a strong network protective layer that adheres to the surface of the car paint to restore its original brightness. The protective agent is rich in ultraviolet protective agents, which can greatly reduce solar radiation and resist the erosion of chemical components such as acids and alkalis.

Step 5: Platinum coating. 

Before doing this process, be sure to clean the car, leaving no trace of grinding or squeezing. Spread the film evenly over the car paint surface, wait 3 to 5 minutes, and then polish the car body with dust-free paper to make the car paint as bright as a mirror.

At this point, a car that has been glazed and beautified will appear in front of you. When parked under the scorching sun, you no longer have to worry about car paint fading or cracking.